Light Control Film “LC MAGIC”

Product Details

Features

High transparency

Our smart glass achieves high transmission while maintaining the natural clarity of the glass.
Ultra thin and easy to apply

Ultra-thin film can be easily applied to curved surfaces or retrofitted onto existing panes.
Project with precision on Opaque Mode

Use opaque mode for stunning high-definition image projection without sacrificing quality.
Produced in-house at Toppan plants

Experience the exellence of Japan-made quality and reliability! Crafted domestically in our Class 100 cleanroom.
Nation’s largest size offerings

A single sheet of our light control film can cover large windows and partitions.

Width: 1,450mm

Product Details

Product Lineup

Normal Mode

Conventional type: Opaque when the power is off and transparent when the power is on.

Features of Normal Mode
- Easily create private spaces
  
  Create private spaces effortlessly with our high-haze opaque state.
- Adjustable transparency
  
  Adjusting transparency to meet your needs is simple and convenient using our smartglass controller.
Reverse Mode

New type: Our new film technology switches to a transparent state when the power is off, a new standard in the industry!

Features of Reverse Mode
- Energy and enviornment friendly
  
  Ideal for environments prioritizing a transparent surface, our reverse mode film stays clear without consuming power to save energy!
- Still visible during power outages!
  
  In the event of power failures our reserve mode film conveniently maintains its transparent state.

Basic Data

Normal-Mode film

Thickness		0.27mm
Maximum dimension		1,450x3,000mm
Total light transmittance (when activated)^12		86%
Parallel light transmittance^*2	ON	82%
Parallel light transmittance^*2	OFF	1%
Haze^12	ON	5%
Haze^12	OFF	98%
Response time^*3		0.1sec
Power consumption^*4		5W/m²
Driving voltage		AC40～80V
Operating temperature		-20～90℃
SWOM (Weathering test)^*5		Passed 2,000 hours

This is a value measured based on JIS K 7361-1 and JIS K 7136, and not a guaranteed value.
A value measured at a temperature environment of 23℃.
This is a response speed of the film at a temperature environment of 23℃, not including the activation and response time of the power supply equipment. In a low temperature environment, the response speed will be slower due to the characteristics of the film.
A value measured at a temperature environment of 23℃, using the optimal voltage for an area of 1m² (square wave: 40Vrms 40Hz).
This is a power consumed by the film only, not including the consumption by other devices (power supply, etc.).
SWOM (weathering test) was conducted based on JIS A 5759. Satisfied the values specified in the Toppan's standard using Toppan-specified adhesive and edge sealing.

Reverse-Mode film

Thickness		0.26mm
Maximum dimension		1,450×3,000mm
Total light transmittance (when not activated)^12		88%
Parallel light transmittance^*2	ON	7%
Parallel light transmittance^*2	OFF	80%
Haze^12	ON	92%
Haze^12	OFF	10%
Response time^*3		0.5sec
Power consumption^*4		5W/m²
Driving voltage		AC25～80V
Operating temperature		-10～60℃
SWOM (Weathering test) ^*5		Passed 2,000 hours

This is a value measured based on JIS K 7361-1 and JIS K 7136, and not a guaranteed value.
A value measured at a temperature environment of 23℃.
This is a response speed of the film at a temperature environment of 23℃, not including the activation and response time of the power supply equipment. In a low temperature environment, the response speed will be slower due to the characteristics of the film.
A value measured at a temperature environment of 23℃, using the optimal voltage for an area of 1m² (square wave: 40Vrms 60Hz).
This is a power consumed by the film only, not including the consumption by other devices (Power supply, etc.).
SWOM (weathering test) was conducted based on JIS A 5759. Satisfied the values specified in the Toppan's standard using Toppan-specified adhesive and edge sealing.

Click here for
Options / Components

Movies

Showroom at Shibaura Office

Discover our showroom at Toppan's Shibaura office in Tokyo, Japan, where we've set up LC MAGIC films for the following demos: large partitions, moving section installed, gradation, light control using a remote controller, segmented film.
Ohmi Railway “Yokaichi Station” Exhibition

LC MAGIC was used for the "Railway Headmark Exhibition" held at Yokaichi Station in Shiga.
Light Control Film “LC MAGIC”

This is an introductory video screened at Automotive World 2022.

Ordering Process

Product inquiry
Preliminary cost estimate
Field assessment
Final cost estimation
Order

Capabilities of LC MAGIC

Dimming Technology

Liquid crystals are arranged in a random array. As the refraction indexes of the liquid crystals and polymers are not the same, light is scattered, which makes the state of the film opaque.
Liquid crystals are arranged in a regular array. As the refraction indexes of the liquid crystals and polymers are the same, light passes through, which makes the state of the film transparent.

Products Under Development

Note :
This product is under development.
Please contact us for trial production and mass production.

Normal Black

Our new line, LC MAGIC™ Normal Black, offers a sleek dark tint that allows only 5% of visible light to pass through when power is off.
Toppan aims to launch mass production of Normal Black in 2024, making samples available to the transportation industry, including the automotive, aviation, and rail sectors.
Please inquire about building materials and other uses.